Site Search Tool
Search by Part Number
Quick Links
  Resource Directory
  About Us
  Contact Us
  Terms & Conditions
  Privacy Policy
Companion Sites

Please visit our entire family of online industrial supply outlets!
Our full line industrial store
Calibration Gas
Precision Calibration Gas Blends
GPI - Turbine & Oval Gear Flow Meters
Mechanical Turbine Water Meters
GPI Fuel/Chemical Pumps/Meters
Draeger Gas Detection Tubes
Draeger Safety Products
Precision Blended Calibration Gas
Pressure & Flow Control Products
Hedland Variable Area Flow Meters
Dynasonics Ultrasonic Flow Meters
Draeger Gas Detection Tubes
Wika Tronic Transmitters
Schroeder Hydraulic Filters, Elements
Jamesbury Ball Valves
Charlynn Hydraulic Motors

Draeger X-am 7000 with EC Sensors

<< Previous in X-am 7000 Series Next in X-am 7000 Series >>

Customer Price: From $3,520.00 to $4,898.00
Manufacturer: Draeger

Product Options

Sensor Warranty:
Sensor Type:
Datalogger Option:
Draeger X-am 7000

(With all our Draeger Equipment, we offer many variations, support accessories, calibration equipment and bump testing gear.  Please call us for your specific needs and application.  We'll help you select the best gas detector for your requirements.  Also, call us for any questions, upgrades or add on accessories you may need.)

Dräger X-am 7000 is the innovative solution for the simultaneous and continuous measurement of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. It is the ideal companion in a variety of applications where the reliable detection of oxygen, toxic and combustible
gases and vapors is necessary.

The ACGIH (the American Conference of Gov Industrial Hygenists) has recently lowered the minimum allowable level of exposure of H2S from 10 ppm to 1 ppm.

Anyone doing confined space work for the US Government is supposed to have their A1 alarms set at 1 ppm right now. You can NOT truly set these levels on most of our competitors instruments, as they are blind to measurements of H2S at levels of 2 to 3 ppm, Draeger begins reading now at 0.2 ppm and can be set accurately to the 1ppm standard.

The extensive portfolio of over 25 different DraegerSensors enables the detection of more than 100 gases and vapors. The Dräger X-am 7000 can be equipped with three electrochemical, and two catalytic bead, infrared or photo ionization sensors. During operation, it is also possible with the catalytic-Ex sensor to change the gas being measuring or the measurement range of the sensor. In this way, the instrument can be easily adapted to various applications. DrägerSensors are renowned for their fast response time, minor cross sensitivities, high level of accuracy and long lifetimes.

In addition to the electrochemical sensors, the catalytic, infrared and photo ionization sensors are automatically recognized by the instrument upon insertion. All sensors are pre-calibrated, and therefore a reconfiguration of the Draeger X-am 7000 can be done by simply changing the sensor. No additional service or maintenance is necessary.

The built-in high-performance pump makes it possible to sample gas using a hose up to 45 m/150 ft. long. The operation of the pump is continuously monitored, and the instrument will generate an alarm if the flow of gas reduces.

The software menu within the Draeger X-am 7000 was designed in partnership with our customers making it simple and easy to use. With the help of Dräger CC-Vision software, up to 5 different detection applications can be saved within the instrument. By doing so, the use of different instrument configurations can be set for that specific application. During operation, a simple change between these set parameters can be done via the instrument's menu.

A flexible "goose neck" probe eases the search for leckages on pipelines, valves, flanges, etc. In the tracking-mode, the instrument generates an increasing or decreasing rate of beeps, depending on the gas concentration detected.

In addition to the built-in dust and water filter, the Dräger X-am 7000 can be submersed in up to 1 m or 3 ft. of water without damage. A specially designed rubber boot protects the instrument against damage even from a drop of 1.5 m or 5 ft.

The completely new design of the rechargeable battery pack with intelligent charging management guarantees full functionality of the instrument over a period of up to 20 hours. An alkaline battery pack is also available. The DrägerSensors used in the Draeger X-am 7000 have a typical lifetime of over 5 years. If, over time, a sensor exchange is necessary, the modular approach of the instrument allows for this in a few simple steps.

Alarm conditions can not be ignored because of the extremely loud multi-tone horn. In addition, the visual alarm can be seen 360°, ensuring that the user notices the warning. By generating an optional life-signal every six seconds, the Dräger X-am 7000 confirms that it is functioning properly.

The large graphic display and the auto-zoom function during alarms guarantee an easy recognition of the measurement values and symbols displayed for immediate reaction to the situation or hazards. All information is provided in plain text for easy understanding.

An integrated data logger logs up to 3000 sets of values – that equals 100 hours when recording one set per minute. The data can then be transferred to and evaluated on a PC using an infrared interface together with the Drager GasVision software package.

Dimensions (W x H x D) 150 x 140 x 75 mm; 5.9 x 5.6 x 3 in.
Weight Instrument 600 g; 21 oz.
Rechargeable battery 490 g; 17 oz. (3.0 Ah)
730 g; 26 oz. (6.0 Ah)
Ambient conditions Temperature - 20 to + 55 °C, short-term - 40 to + 60 °C
- 5 to + 105 °F, short-term - 40 to + 130 °F
Pressure 700 to 1300 hPa
Humidity 10 to 95 % r.h.
Ingress protection IP 67
Battery life NiMH (4.8 V / 3.0 Ah) > 9 hours
NiMH (4.8 V / 6.0 Ah) > 20 hours
Alkaline > 20 hours
Alarms Visual 360° flashing LEDs, audible alarm (> 100 dB at 30 cm or 1 ft.)
Charging time 3.5 to 7 hours, depending on battery type
Pump mode Maximum hose length of 45 m; 150 ft.
Approvals ATEX II 2G EEx ia d IIC T4
-20 ≤ Ta ≤ + 60 °C (NiMH)
-20 ≤ Ta ≤ + 40 °C (Alkaline)
I M2 EEx ia d I
BVS 03 ATEX E 371 X
Measurement performance certificate according to:
EN 61779-1 + 4 (for the CatEx sensors from methane to nonane)
EN 45544-1 + 2 (CO, H2S, CO2)
EN 50101 (O2)
MED Marine Equipment Directive 96/98/EC
UL Class I, Div 1, Group A, B, C, D Temp. code T4
-20 ≤ Ta ≤ + 60 °C (NiMH)
-20 ≤ Ta ≤ + 40 °C (Alkaline)
CSA Class I, Div 1, Group A, B, C, D Temp. code T4
-20 ≤ Ta ≤ + 60 °C (NiMH)
-20 ≤ Ta ≤ + 40 °C (Alkaline)
IECEx Ex ia d I/IIC T4
-20 ≤ Ta ≤ + 60 °C (NiMH)
-20 ≤ Ta ≤ + 40 °C (Alkaline)
CE-mark Electromagnetic compatibility (directive 89/336/EWG)

Product Reviews

Rate This Product:
or Create a Review
(5 Ratings, 0 Reviews) Average Rating:
Your cart is empty.

Flat Rate Shipping, Just $8.95 for UPS Ground Shipping

We Accept:
We accept Visa, MC and AMEX

Secure Transactions by:

Subscribe Now

A Business Unit of...
A Business Unit of Cross Company, Established 1954

Log-In / Log-Out